APRS message screen and key operation
Description of APRS message screen and key operation
Pressing F, then 0 twice in the frequency display screen opens the APRS
MESSAGE LIST screen.
Pressing 0 toggles between the APRS STATION LIST screen and APRS
MESSAGE LIST screen.
On the APRS MESSAGE LIST screen, up to 60 sent and received messages can be
stored to Memory, and displayed.
The newest message appears at the top of the list.
a Number:
b Reception/Transmission:
c Callsign:
d Time or date: Time (HH Hours: MM Minute) or Date (MM Month/DD Day) that message was
e Beacon Automatic/Manual Reception Icon:
O... Scroll Screen
1... Move cursor to the top of APRS MESSAGE LIST.
V... Delete selected beacon station on the LCD (See page 26).
H ... Go to MESSAGE Reception/Transmission Details screen (See page 37).
D... Go to MESSAGE EDITING screen (See page 40).
M... Go to Frequency Display Screen
Press M over 1 second ... Set mode (See page 45).
34
The number of received or transmitted message is
displayed.
An icon like the following is displayed during reception
or transmission.
W Received message (Unread)
W Received message (Read)
X Transmitted Message (ACK Received)
X Transmitted Message (ACK Not Received)
X Transmitted Message (Transmission Incomplete)
4 to
* This value represents the remaining number of transmissions
Transmitted and received CALLSIGNS are displayed.
transmitted or received is displayed.
If icon does not appear, the beacon is manually transmitted.
If
icon appears, the beacon is automatically transmitted. If
beacon is automatically transmitted with SmartBeaconing.
icon is displayed, the