Section 3 - Configuration
Transmit Power:
Set the transmit power of the antennas.
WLAN Partition:
This enables 802.11d operation. 802.11d is a wireless
specification developed to allow implementation of
wireless networks in countries that cannot use the
802.11 standard. This feature should only be enabled
if you are in a country that requires it.
WMM Enable:
WMM is QoS for your wireless network. This will
improve the quality of video and voice applications
for your wireless clients.
HT20/40 Coexistence:
Enable this option to reduce interference from
other wireless networks in your area. If the channel
width is operating at 40 MHz and there is another
wireless network's channel over-lapping and causing
interference, the router will automatically change to
20 MHz.
D-Link DIR-816L User Manual
Advanced Wireless
131