D-Link AC750 User Manual page 66

Section 3 - Configuration
Step.3:.Internet.Connection.(Dynamic.IP.Address)
After selecting the dynamic IP address Internet connection method, the following page will appear.
The following parameters will be available for configuration:
MAC.Address:
Clone.Button:
Host.Name:
Primary.DNS.Address:
Secondary.DNS.Address:
Click Next to continue.
Step.3:.Internet.Connection.(PPPoE)
After selecting the PPPoE Internet connection method, the following
page will appear:
The following parameters will be available for configuration:
User.Name:
Password:
Click Next.to continue.
D-Link DIR-816L User Manual
Enter the MAC address of the Internet
gateway (plugged into the Internet port of
this device) here.
If the configuration PC also acts as the Internet
gateway, then click on the Clone.Your.PC's.
MAC.Address button to copy the PC's MAC
address into the space provided. If you're not
sure, leave the MAC address field blank.
Enter the host name used here. You may also
need to provide a host name. If you do not
have or know this information, please contact
your ISP.
Enter the primary DNS IP address used here.
Enter the secondary DNS IP address used here.
This field is normally optional. Only one DNS
address is required for a functional Internet
connection, but using a second DNS address
provides more stability.
Enter the PPPoE account user name used here.
This information is given by the ISP.
Enter the PPPoE account password used here.
This information is given by the ISP.
61