D-Link AC750 User Manual page 112

Section 3 - Configuration
My IPv6 Connection: Select PPPoE from the drop-down menu.
Address Mode: Select Static if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases,
select Dynamic.
IP Address:
Enter the IP address (Static PPPoE only).
User Name: Enter your PPPoE user name.
Password:
Enter your PPPoE password and then retype the password
in the next box.
Service Name: Enter the ISP Service Name (optional).
Select either Always-on, On-Demand, or Manual.
Reconnection Mode:
Maximum Idle Time: Enter a maximum idle time during which the Internet
connection is maintained during inactivity. To disable this
feature, enable Auto-reconnect.
MTU: Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1492
is the default MTU.
IPv6 DNS Settings: Select either Obtain.DNS.server.address.automatically or
Use.the.following.DNS.Address.
Primary/Secondary DNS Enter the primary and secondary DNS server addresses.
Address:
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router.
D-Link DIR-816L User Manual
PPPoE
107