Advanced Wireless Settings - D-Link DIR-605 User Manual

Section 3 - Configuration
Transmit Power:
Set the transmit power of the antennas.
Beacon Period:
Beacons are packets sent by an Access Point to synchronize
a wireless network. Specify a value. 100 is the default setting
and is recommended.
RTS Threshold:
This value should remain at its default setting of 2432.
If inconsistent data flow is a problem, only a minor
modification should be made.
Fragmentation
The fragmentation threshold, which is specified in bytes,
Threshold:
determines whether packets will be fragmented. Packets
exceeding the 2346 byte setting will be fragmented before
transmission. 2346 is the default setting.
DTIM Interval:
(Delivery Traffic Indication Message) 3 is the default setting.
A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.
WLAN Partition:
This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in countries
that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it.
WMM Enable:
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients.
Short GI:
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may create
higher data loss.
D-Link DIR-605 User Manual

Advanced Wireless Settings

30