D-Link AC750 User Manual page 88

Section 3 - Configuration
Wireless Security Mode: WPA-Enterprise
Wi-Fi Protected Access (WPA) is the most advanced and up to date
wireless encryption method used today. This is the recommended
wireless security option. WPA supports two authentication frameworks.
Personal (PSK) and Enterprise (EAP). Personal requires only the use of a
pass-phrase (Shared Secret) for security.
The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this option
if the clients that will be used with the router
only support the older standard. WPA2 is the
newer implementation of the stronger IEEE
802.11i security standard. With the "WPA2"
option, the router tries WPA2 first, but falls
back to WPA if the client only supports WPA.
With the "WPA2 Only" option, the router
associates only with clients that also support
WPA2 security.
Cipher Type: Select the appropriate cipher type to use here.
Options to choose from are Temporal Key
Integrity Protocol (TKIP), Advanced Encryption
Standard (AES), and Both (TKIP and AES).
Group Key Update Enter the amount of time before the group
Interval: key used for broadcast and multicast data is
changed.
RADIUS Server IP When the user chooses to use the EAP
Address: authentication framework, the RADIUS server's
IP address can be entered here.
RADIUS Server Port:
When the user chooses to use the EAP authentication framework, the RADIUS server's port number can be entered
here.
RADIUS Server
Enter the shared secret used here. This secret phrase needs to be the same on all of the wireless clients for them to
Shared Secret:
be able to connect to the wireless network successfully.
D-Link DIR-816L User Manual 83