D-Link AC750 User Manual page 71

Section 3 - Configuration
Internet Connection Type
In this section, the user can select from a list of Internet Connection types that can be configured and used on this router. Options to choose
from are Static IP, Dynamic IP, PPPoE, PPTP, L2TP, and DS-Lite.
After selecting a specific Internet Connection type, this page will automatically refresh and provide unique fields to configure related to the
specified Internet Connection type.
My Internet Connection is: Dynamic IP (DHCP)
The default WAN configuration for this router is Dynamic IP (DHCP). This
option allows the router to obtain an IP address automatically from the
device that is connected to the Internet port.
Note: If you're not sure about the type of Internet Connection you have,
please contact your Internet Service Provider (ISP) for assistance.
After selecting Dynamic IP, the following parameters will be available for
configuration:
Host Name:
Use Unicasting:
Primary DNS:
Secondary DNS:
MTU:
MAC Address:
D-Link DIR-816L User Manual
The Host Name is optional but may be
required by some ISPs. Leave blank if you
are not sure.
Tick this option if you ISP uses the unicast
method to provide IP addresses.
Enter the Primary DNS IP address used
here.
Enter the Secondary DNS IP address used
here. This field is normally optional. Only
one DNS address is required for a
functional Internet connection, but
using a second DNS address provides
more stability.
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP.
1500 is the default MTU.
The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It
is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone
Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet
card.
66