Configuration Example Of St Remote System - Sony DWR-R01D Operating Instructions Manual

Configuration Example of ST Remote System

The DWR-R01D controls the system with the wireless remote control function, by using the antenna attached to the REM
ANT connector on the rear panel.
Note
In the ST remote system, each DWR-R01D unit uses one channel of radio wave. When more transmitters are used in the
system, communication congestion may occur, resulting in slow response on the controlled devices. If you plan to use six
or more transmitters, operation in NT remote system using the optional RMU-01 is recommended.
Up to six
transmitters
1)
DWR-R01D
Mixer of I/O box
1) Use of up to three DWR-R01D units is recommended.
UHF antennas
To a wall outlet
System Configuration Examples
21