Configuration Example of ST Remote System
The DWR-R02DN controls the system with the wireless remote control function, by using the antenna attached to the
REM ANT connector on the rear panel.
In the ST remote system, each DWR-R02DN unit uses one channel of radio wave. When more transmitters are used in the
system, communication congestion may occur, resulting in slow response on the controlled devices. If you plan to use six
or more transmitters, operation in NT remote system using the optional RMU-01 is recommended.
Up to six
Mixer or I/O box
1) Use of up to three DWR-R02DN units is recommended.
To DC power supply
To a wall outlet