Table of Contents
Advertisement
4. Log in to the ILOM command-line interface (CLI) using an Administrator
account.
SUNSP-<product serial number> login: root
Password: changeme
The ILOM CLI prompt (->) appears.
5. If you are logged in to ILOM on the CMM, navigate to the server module by
typing:
-> cd
/CH/BLn/SP
Where BLn represents the slot in which the server module is installed in the
chassis.
▼ Log In to ILOM Using an Ethernet Connection
This procedure requires that you have an ILOM Administrator account and that you
know the IP address, hostname, or IPv6 local link name assigned to the CMM or the
server module SP.
Note – The default ILOM Administrator account shipped with each server module
SP and CMM is root and its password is changeme. If this default Administrator
account has since been changed, contact your system administrator for an ILOM
user account with Administrator privileges.
1. Using a secure shell (SSH) session, log in to ILOM by specifying your
Administrator account user name and the IP address, hostname, or IPv6 local
link name of the CMM or server module SP.
For example:
ssh username@host
or
ssh -l username host
Where host is either an IPv4 or IPv6 address, an IPv6 local link name, or a DNS
hostname. Be sure to enclose an IPv6 address in brackets. For example:
[fec0:a:8:b7:214:rfff:fe01:851d]
The ILOM password prompt appears.
Chapter 3
Connecting to ILOM and Applying Main Power to the Server Module
19
Advertisement
Table of Contents
