Oracle Vm Manager Configuration; Table - Sun Microsystems Blade X6270 M2 Installation Manual

Worksheet for Oracle VM Server Configuration

TABLE 6-1

Information for
Configuration
Oracle VM Root
Server
passwords
Oracle VM agent Choose an Oracle VM agent password; password
Network
interface
Network Static IP address Supply the IP address for the server. A static IP
configuration
Netmask
Gateway
DNS server
Hostname

Oracle VM Manager Configuration

The Oracle VM software preinstalled on your server includes optional Oracle Linux
VM Manager software.
If you already have an Oracle VM Manager installed as part of your configuration, it
is not necessary to deploy the Oracle Linux VM Manager, since you can register the
new Oracle VM Server to the existing VM Manager. In this case, when the
installation script asks Deploy Oracle VM Manager virtual machine?, enter
n (no). It is not necessary to fill out the worksheet in
However, if you do not currently have an Oracle VM Manager in your configuration,
enter y (yes) in response to the question about deploying a VM Manager, and then
configure the Oracle VM Manager by responding to the on-screen prompts. Use
TABLE 6-2
Manager.
42 Sun Blade X6270 M2 Server Module Installation Guide • October 2010
Description or Example
Choose a root password; there are no restrictions on
the characters or length.
must be at least six characters.
Supply the interface to be used to manage the
server.
address is required.
Example: 172.16.9.1
If the server is part of a subnet, supply the netmask
of the subnet.
Example: 255.255.0.0
If the server is accessed via a gateway, supply the IP
address of the gateway.
Supply the IP address for the domain name server
(DNS). One (and only one) DNS is required.
Supply the fully qualified domain name for the
server.
For example: foo.oracle.com.
to collect the information you will need to configure the Oracle VM
Your Answers:
.
TABLE 6-2