Connecting To Ilom And Applying Main Power To The Server Module; Connecting To Ilom - Sun Microsystems Blade X6270 M2 Installation Manual

3
C H A P T E R
Connecting to ILOM and Applying
Main Power to the Server Module
This chapter describes how to access the Oracle Integrated Lights Out Manager
(ILOM) command-line interface (CLI) to manage the server. It also describes how to
apply main power to the server module, power off the server, and troubleshoot
power states.
This chapter contains the following topics:
"Connecting to ILOM" on page 17
■
"Applying Main Power to the Server Module" on page 26
■
Note - This chapter describes how to connect to the ILOM command line interface.
ILOM is also available as a web interface (BUI). For instructions on using the web
interface, and for complete instructions for using ILOM, refer to the Oracle
Integrated Lights Out Manager (ILOM) 3.0 Documentation Collection.

Connecting to ILOM

This section describes how to connect to ILOM. It contains the following sections:
"Network Defaults" on page 18
■
"Log In to ILOM Using a Serial Connection" on page 18
■
"Log In to ILOM Using an Ethernet Connection" on page 19
■
"Modify Network Settings" on page 20
■
"Test IPv4 or IPv6 Network Configuration" on page 25
■
"Exit ILOM" on page 3-26
■
17