Configuring The Preinstalled; Solaris 10 Operating System; Configuration Worksheet - Sun Microsystems Blade X6270 M2 Installation Manual

5
C H A P T E R

Configuring the Preinstalled

Solaris 10 Operating System

This chapter explains the steps for configuring the Oracle Solaris 10 Operating
System (OS) that is preinstalled on the hard disk drive or solid state drive, if
ordered. The preinstalled Solaris version is Solaris 10 10/09 or later.
Note - Unlike with SPARC systems, you will not see the output of the preinstalled
Solaris 10 image through a monitor when you power on the server. You will see the
BIOS power-on self-test (POST) and other boot information output.
This chapter includes the following topics:
"Configuration Worksheet" on page 33
■
"Configuring Server RAID Drives" on page 36
■
"Configuring the Preinstalled Solaris 10 Operating System" on page 37
■
"Solaris 10 Operating System User Information" on page 39
■
"Using the Solaris Installation Program" on page 39
■
"Reinstalling the Solaris Operating System" on page 40
■

Configuration Worksheet

Before you begin configuring the operating system, use the worksheet in
gather the information that you will need. You only need to collect the information
that applies to your application of the system.
to
TABLE 5-1
33