Chain Dialing - NEC Dterm Headset Cordless User Manual

Chain Dialing

The memory locations in the handset are not limited to telephone numbers. You can also store a
group of numbers (up to 20 digits), that you need to enter once your call connects. This is referred
to as Chain Dialing.
An example of this is a bank account number. Store the special number in the Phonebook location
(refer to Storing Telephone Numbers, Names, and Speed Dial on page 9). Once you have called
your bank, and when your prompted to enter the account number, press
or to select the number in the Phonebook location, then press
UP DOWN
Editing or Erasing a Sto red Name, Telephone
Number, and Speed Dial
When the telephone is in standby mode, press
the phonebook locations. (Refer to D
Phonebook section.)
Editing the Stored Data
1. When the phonebook location to be edited appears, press
SELECT/CH. Then
2. Follow steps 3 ~ 7 under Storing Telephone Numbers, Names, and
Speed Dial on page 9 to complete the editing operation.
3. Press
SELECT/CH
Done appears in the display.
term
Headset Cordless Owner's Guide for Viewing the
Store/Edit Name appears.
. You will then hear a confirmation tone and
or
UP DOWN
1 1
PB/ROCKET/
SELECT/CH
, or the number keypad to view
Store/Edit Name
Smith, Jay
and use
.