Volume Setup; Adjusting The Earpiece Volume - NEC Dterm Headset Cordless User Manual

Volume Setup

Setting the ringer volume on the D
these steps:
1. When the telephone is in the standby mode, press
display then shows the telephone menu in standby mode.
2. Press
UP or
then press
3. Press
UP
settings (Ringer Off, Ringer Low, or Ringer High). You will hear a
ringer or melody at the selected volume (or does not ring when you
select Ringer Off).
4. Press
SELECT/CH
5. Press
END
If you select Ringer Off, <Ringer Off> appears on the display when
you make or receive calls, or when charging the handset.

Adjusting the Earpiece Volume

The handset earpiece volume setting can only be adjusted during a telephone call. The available
volume options are:
• Volume Low
• Volume Medium
• Volume High
• Volume Maximum
Press or
UP DOWN
last volume setting selected.
When you press
tone sounds.
term
to move the pointer to Ringer Volume,
DOWN
.
SELECT/CH
or to move the pointer through the ringer
DOWN
, and you will hear a confirmation tone.
to exit.
to select the volume setting. When you hang up, the telephone keeps the
UP in the maximum volume level or
Headset Cordless telephone is done manually by following
MENU/MUTE
8
. The
DOWN in lowest volume level, an error
Ringer Volume
Ringer Tones
Distinct. Ring
Ringer Off
Ringer Low
Ringer High