Table of Contents
Advertisement
Press the OK soft key. You will hear a confirmation tone, and Do ne ! appears in the
8
display.
• When the memory is full, you will hear a beep and
note
cannot store names and numbers.
• The pause key counts as one digit. Pressing the PAUSE soft key more than once
increases the length of the pause between numbers. Each pause represents a
2-second delay.
• If you choose not to store a Distinctive Ring, simply select the "No Selection"
option.
• If you choose not to store the name/number as a Speed Dial, simply choose the
"No Selection" option.
Chain Dialing
The memory locations in the handset are not limited to phone numbers. You can also store a group of
numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain
Dialing.
An example of this is a bank account number. Store the account number in one of the phonebook
locations (refer to "Phonebook (Storing Phone Numbers, Names, Distinctive Rings and Speed Dial)" on
page
19). When you call your bank and are prompted to enter the account number, scroll through your
phonebook locations until you find your account number, and then press the DIAL soft key.
Steps for Entering Names and Special Characters
Refer to the letters on the number keys to select the desired characters. With each press of a number
key (
-
), the displayed character appears in the following order: Upper case letters first, lower case
0
9
letters next and finally the number corresponding to the key.
[ 2 0 ]
Memory Full
appears. You
Number of times key is pressed
A d d i t i o n a l I n f o r m a t i o n
Advertisement
Table of Contents
