Alcatel 4035 Manual page 54

Chapter 2
• Other participants
The conference circuit being still reserved, the attendant dials in enquiry call mode the number
of the following participant and activates his call.
After the answer of the called user and by pressing the «Cfprog» key, he will connect the two
users together.
In the same way, the attendant adds the other participants to the conference.
By pressing the «Releas» key, the attendant disconnects from the multiconference circuit et returns
to its idle screen (normal service).
The conference circuit is used
The attendant is in conversation with a correspondent. This correspondent asks to join the
conference.
• The circuit is not saturated
The attendant dials in enquiry call mode the programmed conference prefix, followed by the
access code to reserve the multiconference circuit.
After code identification, the screen shows:
Example:
By pressing the «Cfprog» key, the attendant adds the correspondent to the programmed
conference.
By pressing the «Releas» key, the attendant disconnects from the multiconference circuit and
returns to the idle screen (normal service).
• The circuit is saturated
In this case, the screen shows that the number of participants is at its maximum and that no more
can be added.
Notes:
- When a participant enters the conference, an audible beep signals this during the conversation.
- If an external trunk is alone in the conference, it will be forwarded to the attendant set after a timer.
- On the other hand, if a set enters the conference with this trunk, the timer is cancelled.
2-32
Attendant set facilities
Conv
3BA 19875 ENAA - Ed. 02 - April 2000 - Alcatel 4035 - Attendant set
user
3456
Cfprog
Entity
Releas