NEC DT750 User Manual page 118

STEP 4: Press
Feature
To program a hook switch for transfer or feature activa-
TIP
tion, press Recall
To program a pause, press
TIP
than the first digit. (– displays on LCD.)
To program a Voice Call, press
TIP
station number. (V displays on LCD.)
One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a fea-
ture key by storing the feature access code. The fea-
tures may be programmed on a system basis by the
TIP
Telephony Server Administrator.
Access codes may be stored in conjunction with tele-
phone numbers. For example, one button can be pro-
grammed by the user to transfer to a certain extension.
• TO REGISTER NAME ONTO ONE-
TOUCH SPEED CALLING KEY
STEP 1: Press NAME.
Push Speed Calling Key
1:25 PM
NAME
STEP 2: Press a desired One-Touch Speed Calling
key.
again. lamp goes off.
Feature
as first digit. (! displays on LCD.)
Recall
as any digit other
Transfer after dialing
MON 12 JUL 2010
>>>
^
←
For the key to which no name information is registered,
TIP
the character "SPD" will be displayed.
STEP 3: Enter desired name on the keypad. Display
indicates the name entered.
NEC BNET
←
STEP 4: Press >>> twice to display the following soft
keys.
NEC BNET
SET
CLEAR
112
SPD
→
BK >>>
^
→
BK >>>
^
>>>
CANCEL