NEC DT750 User Manual page 82

• TO SET USABILITY
The procedure below shows how to set the operation of Help key
while pop-up window is displayed.
This feature is supported from Terminal Firmware Ver-
Note
sion 5.0.0.0.
STEP 1: Display the Menu screen, and select Setting.
1
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using
or OK.
1
• Press .
[Setting]
1 User Setting
2
Download
Data Backup/Restore
3
↓
Menu soft key is Back soft key for the firmware version
TIP
before 4.0.0.0.
7
STEP 3: Select Usability.
Select an item by one of the following operations.
• Touch panel operation.
• Highlight an item by using
or OK.
7
• Press .
, and press ,
1/1
Menu OK
, and press ,
[User Setting]
1
Incoming Call
Talk
2
3 Display
4 Change Password
5 Security
6
Peripherals
Usability
7
1
STEP 4: Select
Select an item by one of the following operations.
• Touch panel operation.
• Press
1
• Press
[Usability]
1 Help Key Mode
76
1/1
↓ OK
Back
Help Key Mode.
or OK.
.
1/1
Cancel OK