NEC DT750 User Manual page 51

0
STEP 5: Select Automatic,
able (see the following table).
Select an item by one of the following operations.
• Touch panel operation
• Highlight an item by using
OK.
0 2
• Press -
[RTP Alarm]
0
Automatic
1
Disable
2 Enable
Menu Items
Follow the setting on the System. If no
0 Automatic setting is made in the System, the
default setting (Alarm=ON) is applied.
1 Disable Follow the setting on the terminal (OFF).
2 Enable Follow the setting on the terminal (ON).
For the setting on the System, contact the System
TIP
Administrator.
TIP
Default setting is Automatic.
TIP
The enabled item is highlighted.
1
Disable or
, and press
, and press or OK.
1/1
Back OK
Descriptions
2
En-
or
45