Removing The High Limit Thermostat; Removing The Thermal Limiter (Electric Dryers); Removing The Heating Element Assembly (Electric Dryers); Removing The Control Thermistor - Frigidaire 27" Dryers with electronic controls Service Manual

Note: Do not lose the grounding ball or the tinnerman
mounting clip from the rear of the dryer.

Removing the high limit thermostat:

1. Disconnect the dryer from electrical supply and
remove the top panel.
2. Disconnect the two wires and remove the two
screws holding thermostat to the heating element
assembly.
Removing the thermal limiter: (Electric dryers)
1. Disconnect the dryer from electrical supply and
remove the top panel.
2. Disconnect the two wires and remove the two
screws holding limiter to the rear panel.
Removing the heating element assembly: (Electric
dryers)
1. Disconnect the dryer from electrical supply and
remove the drum.
2. Disconnect the two wires from the heating element.
3. Remove the high limit thermostat.
4. From the rear of the dryer remove the four screws
securing the heating element assembly to the rear
of the cabinet.

Removing the control thermistor:

1. Disconnect the dryer from electrical supply and
remove the front panel.
66