Removing The Idler Pulley; Removing The Idler Pulley Assembly; Removing The Drive Motor; Removing The Burner (Gas Dryers) - Frigidaire 27" Dryers with electronic controls Service Manual

Removing the idler pulley:

1. Disconnect the dryer from electrical supply and
remove the rear access panel.
2. Release the belt from the motor pulley and slide the
idler pulley off.

Removing the idler pulley assembly:

1. Disconnect the dryer from electrical supply and
remove the rear access panel.
2. Release the belt from the motor pulley.
3. Release the idler spring from the motor and lift the
assembly off the motor.

Removing the drive motor:

1. Disconnect the dryer from electrical supply and
remove the drum.
2. Unplug the harness from the motor and remove the
idler assembly.
3. Unscrew the blower wheel from motor shaft.
4. Release the front motor lock from the blower hous-
ing.
5. Release the spring hold down on the rear of the motor
and lift the motor out.
Removing the burner: (Gas dryers)
1. Disconnect the dryer from electrical supply and
remove the front panel.
2. Unplug the igniter, remove the two screws holding
the burner to the valve assembly bracket, and slide
the burner into the combustion chamber to release
burner from the valve.
Removing the ignitor: (Gas dryers)
1. Disconnect the dryer from electrical supply and
unplug the igniter harness.
68
Spring
Hold
Down