Mx-Lc11 (Large Capacity Tray) - Sharp MX-2010U Installation Manual

[20] MX-LC11 (LARGE CAPACITY TRAY)

MX-3610N
1. Unpacking
A. Packed items check
1
4
No. Name
1 Large capacity tray unit
2 Mounting plate upper
3 Connection unit
4 Fixing screw A (Hexagon with seat, S-tight, M4 x 35)
5 Fixing screw B (Hexagon with seat, S-tight, M4 x 12)
6 Fixing screw C (screw 4 x 8 cup)
2. Installation
Before installation, be sure to turn both the operation and main
power switches off and disconnect the power plug from the power
outlet. Make double sure that the data lamp on the operation panel
does not light up or blink when performing installation.
A. Release the lock
1) Remove the paper feed base fixing screw.
Before turning on the power, check to insure that the fixing
screw of the tray is removed. If the power is turned on without
removing the fixing screw, a trouble may be resulted.
2 3
6
5
Quantity
1
2
1
4
2
1
MX-3610N MX-LC11 (LARGE CAPACITY TRAY) 20 – 1
Service Manual
B. Main unit and large capacity tray unit
connection
1) Attach the mounting plate upper to the right side of the main
unit with the fixing screw A.
When attachment, put the rubber section of the mounting plate
upper on the lower side.
2) Remove the right door cover from the machine.
3) Remove the right adjuster.
2
1
2
1