Sharp MX-2010U Installation Manual page 51

3) Turn over the operation panel unit.
4) Remove the clamp. Peel off the mylar and disconnect the con-
nector.
C. Keyboard unit attachment
1) Turn over the operation section cover.
1
2) Attach the keyboard unit and fix it with the fixing screw.
1
2
2
2
1
MX-3610N MX-KB11 (KEYBOARD) 5 – 2
3) Connect the keyboard interface harness and attach the opera-
tion section cover.
Be sure to place the key interface harness between the opera-
tion section cover and the FFC. (Section A)
A
D. Operation panel attachment
1) Connect the connector to the operation panel unit , and fix the
harness with the clamp.
When assembling, put the mylar on the flat cable and fix them
with the clamp.
2
1
2