Sharp MX-2010U Installation Manual page 38

(7) External fixture attachment
1) Attach the rear cabinet.
2
2) Attach the rear upper cabinet.
2
Check to confirm that the wire is not in contact with the har-
ness fixing plate.
If the wire should be in contact with the harness fixing plate
and the upper rear cabinet should be installed under this con-
dition, the wire may be caught between the both parts to be
damaged, causing a short circuit.
harness fixing plate
wire
2
1
2
2
2
1
1
2
2
harness fixing plate
wire
MX-3610N Dehumidifying heater 3 – 11
3) Attach the left cabinet upper.
1
2
4) Attach the left cabinet.
1
5) Attach the paper exit cover.
2