2. Install Hardware
1. Turn off your Cable/DSL Modem, Router, and PC.
2. Connect one RJ-45 network cable from the Modem's Ethernet port to the
Router's WAN port.
3. Connect a different RJ-45 network cable from one of the Router's LAN ports
to your computer's network port.
4. Turn on your Cable/DSL modem.
5. Turn on your router.
6. Turn on your computer.
Verify Hardware Installation
Verify that the following router front panel lights are on: Power, WAN, and one
LAN port. (for each computer connected to your router)
TW100-S4W1CA
2
3
POWER
LAN
WAN
3
POWER
5
English