Install Hardware - TRENDnet TPL-111BR Quick Installation Manual

2. Install Hardware

1. Connect one RJ-45 network cable from the Cable/DSL Modem's Ethernet
port to the WAN port on the Powerline Router.
2. Connect a different RJ-45 network cable from your Powerline Adapter to your
computer's network card.
3. Plug the Powerline Adapter into your power outlet. DO NOT plug the
Powerline Adapter into a surge protector strip.
4. Plug the Powerline Router into your power outlet. DO NOT plug the
Powerline Router into a surge protector strip.
5. Turn on your Cable/DSL modem.
6. Turn on your computer
4
Verify Hardware Installation
Verify that the following front panel lights are lit: Power, WAN, 11G, and one
LAN port LED for each wired computer connected to the AP/Router.
POWER
2
1
LAN
11G
3
3
WAN
English