Install Hardware - TRENDnet TEW-435BRM Quick Installation Manual

2. Install Hardware
1. Connect a RJ-45 network cable from one of the Router's LAN ports to your
computer's network port.
NOTE:
Step 1. does not apply for wireless computer.
2. Connect the ADSL Cable phone line from the WAN port on the TEW-
435BRM (the RJ11 phone connector) to the ADSL terminator.
3. Power on your ADSL Modem Router.
Verify Hardware Installation
Make sure the following Router LEDs are on: Power, LAN, WLAN, WAN.
3
English