Framing For Exhaust Box - Travis Industries Xtreme 6020 Installation Manual

Framing For Exhaust Box

•
The exhaust box must be mounted into framing capable of supporting the weight of the exhaust
box and any vent.
•
Box must be properly weatherized to prevent rain or snow from entering.
•
Framing dimensions for the box are listed below.
•
Box may be mounted in a vertical or horizontal position. If mounted in a horizontal position, the
box must be mounted with the cooling holes on top (to allow for proper airflow).
Cooling Holes
© Travis Industries
Installation
(for qualified installers only)
Horizontal Termination
20-1/2"
521mm
17-1/4"
438mm
Vertical Termination
17-1/4"
438mm
4091229
20-1/2"
521mm
100-01246_000
33