Lifting Handle Installation - Travis Industries Xtreme 6020 Installation Manual

Lifting Handle Installation

The Travis Industries lifting handles (sku
98500711) may be attached to the fireplace
to aid in placement. Two lifting plates,
included with the fireplace, allow for the
handles to attach. Follow the directions
below to install.
Remove the floor mounting brackets.
Attach the lifting handles to the lifting plates.
Remove one of the lifting plate tabs. This
will allow the tab to insert into the stand-offs
on the bottom of the fireplace.
Slide the lifting plate tab attached to the handle into the standoff below the fireplace. Then re-
attach the lifting tab that was removed earlier, making sure it inserts into the standoff. This will
secure the lifting plate to the fireplace
Take care when moving the fireplace to not
damage any structures or your back.
After positioning the fireplace remove the
lifting plates and re-install the floor mounting
brackets.
© Travis Industries
Installation
(for qualified installers only)
4091229
9
100-01246_000