Table of Contents
Advertisement
Mounting
SMA Solar Technology AG
4.2 Mounting the Sunny Boy
To make the job easier, we recommend you use the
supplied wall bracket to mount the Sunny Boy. For
vertical installation on solid concrete or block walls, for
example, you can fit the bracket using 8 mm x 50 mm
hexagon bolts to DIN 571 standard, stainless steel type,
and with wall plugs type SX10.
When selecting the mounting materials, be sure to take
into account the weight of the Sunny Boy (28 kg).
If you do not want to use the supplied wall bracket as a template, observe the dimensions shown in
the illustration below. The procedure for mounting the inverter using the wall bracket is described on
the following pages.
130 mm
260 mm
105 mm
12
SB3300TLHC-IEN094121
Installation Guide
Advertisement
Table of Contents
