Forced Operation; Timer(On/Off); Sleep Timer Operation - LG Single A Svc Manual

Single "a"-inverter type
Hide thumbs Also See for Single A:
Table of Contents

Advertisement

Part 2 Functions & Controls

6.3 Forced operation

• To operate the appliance by force in case when the remote control is lost, the forced operation selection switch is on
the main unit of the appliance, and operate the appliance in the standard conditions.
• The operating condition is set according to the outdoor temp. and intake air temperature as follows.
Indoor temp.
over 24°C
21~24°C
below 21°C
• The unit select the last operation mode in 3 hours.
• Operating procedures when the remote control can't be used is as follows :
- The operation will be started if the ON/OFF button is pressed.
- If you want to stop operation, re-press the button.

6.4 Sleep Timer Operation

• When the sleep time is reached after <1,2,3,4,5,6,7,0(cancel) hr> is input by the remote control while in appliance
operation, the operation of the appliance stops.
• While the appliance is on pause, the sleep timer mode cannot be input.
• While in cooling mode operation, 30 min later since the start of the sleep timer, the setting temperature increases by
1°C. After another 30 min elapse, it increases by 1°C again.
• When the sleep timer mode is input while in cooling cycle mode, the airflow speed of the indoor fan is set to the low.
• When the sleep timer mode is input while in heating cycle mode, the airflow speed of the indoor fan is set to the medi-
um.

6.5 Timer(On/Off)

6.5.1 On-Timer Operation
• When the set time is reached after the time is input by the remote control, the appliance starts to operate.
• The timer LED is on when the on-timer is input. It is off when the time set by the timer is reached.
• If the appliance is operating at the time set by the timer, the operation continues.
While in Fuzzy operation, the airflow speed of the indoor fan is automatically selected according to the temperature.
6.5.2 Off-Timer Operation
• When the set time is reached after the time is input by the remote control, the appliance stops operating.
• The timer LED is on when the off-timer is input. It is off when the time set by the timer is reached.
• If the appliance is on pause at the time set by the timer, the pause continues.
Copyright ©2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Operating Mode
Cooling
Healthy Dehumidification
Heating
- 26 -
Setting speed of
Setting temp.
indoor fan
22°C
High speed
22°C
22°C
LGE Internal Use Only

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents