Advertisement
Introduction
Product Summary
Manufacturer:
Approved product(s):
RF technology:
AP software version:
SpectraLink handset models:
SpectraLink radio mode:
Maximum telephone calls per AP:
AP configuration parameters:
Indoor range (typical):
Required network topology:
Network constraints:
WEP capability:
ESSID auto-learn function:
† Earlier and later software versions have not been tested for the SpectraLink 8000 SVP Server
compliance, except as noted. Refer to Polycom WLAN Compatibility Table for Field Verified AP software
versions.
* Telephone calls per AP must be configured in the system per documentation provided by Polycom.
WEP and Automatic Learn are programmed into each handset in addition to being configured in the AP.
SpectraLink 8000 Wireless Telephones
PN: 1725-36050-001_H.doc
Proxim ORiNOCO AP-600b, AP-600g, AP 700, AP 2000, AP 4000
This document details the specifications for configuring the Proxim
Orinoco AP-600b, AP-600g, AP-700, AP-2000, AP-4000 series access
points (APs) with SpectraLink 8000 Wireless Telephones.
Proxim:
www.proxim.com
AP-600b, AP-600g, AP-700, AP-2000, AP-4000 with Radio
Card: Orinoco 11Mb/s GoldCard
Spread-spectrum, direct sequence(DS), 2.4 GHz
Release 2.5.5 †
e340/h340/i640
See Access Point Configuration below.
See vendor specifications for AP.
Switched Ethernet
Dedicated segment for wireless, single subnet
Yes *
Yes *
SpectraLink 8000 Wireless Telephones use voice over IP (VoIP)
technology on IEEE 802.11b-compatible wireless local area networks
(WLANs). Access points utilize radio frequencies to transmit signals
to and from the SpectraLink 8000 Wireless Telephones.
802.11b
12 *
8020/8030
802.11b
12 *
3
Advertisement
