Creating Or Modifying A F-Code Box - Konica Minolta bizhub 131f Advanced Information

Using F-code box features

11.2.1 Creating or modifying a F-code box

Note
If you want to change an existing F-code box type, you first must erase
the old box, then create a new one.
1
Press [Menu], [3], [4], [1], [Enter].
2
Press [,] or [+] to select the F-code box. Then press [Enter].
What you do next depends on whether you are creating or modifying
the F-code box:
If creating – skip to step 4.
-
If modifying – go to the next step.
-
3
Use the numeric keys to enter the 4-
digit I.D. code and press [Enter].
(If you have not set the I.D. code for
operation protect, you can skip this
step.)
4
The machine is now asking you to a
name for this F-code box.
Enter or modify the name by using the numeric keys.
An F-code box's name can be stored up to 16 characters.
Regarding how to enter the character, see "Entering character" on
page 4-4.
To change a name, press [*] or [)] to move the cursor, press [Cancel]
to erase a name. Then re-enter a name correctly.
5
Press [Enter].
bizhub 131f/190f
11
11-5