Peripherals Settings; Peripherals Pairing Ciscotouchpanels Remotepairing; Peripherals Profile Touchpanels - Cisco TelePresence MX200 Administrator's Manual

Cisco TelePresence MX200 and MX300
Contents

Peripherals settings

Peripherals Pairing CiscoTouchPanels RemotePairing

Not applicable.
Requires user role: ADMIN
Value space: <Off/On>
Off: Remote pairing of Touch 10 is not allowed.
On: Remote pairing of Touch 10 is allowed.
Peripherals Pairing CiscoTouchPanels RemotePairing: On
Example:

Peripherals Profile TouchPanels

Set the number of touch panels that are expected to be connected to the video system. This
information is used by the video system's diagnostics service. If the number of connected touch
panels does not match this setting, the diagnostics service will report it as an inconsistency.
Note that only one Cisco Touch controller is supported in this version.
Requires user role: ADMIN
Value space: <NotSet/Minimum1/0/1/2/3/4/5>
NotSet: No touch panel check is performed.
Minimum1: At least one touch panel should be connected to the video system.
0-5: This number of Touch controllers should be connected to the video system.
Peripherals Profile TouchPanels: NotSet
Example:
D14850.10 MX200 and MX300 Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2011–2014 Cisco Systems, Inc. All rights reserved.
83
Administrator Guide
Setting passwords Appendices