Remote Support User - Cisco TelePresence MX200 Administrator's Manual

Cisco TelePresence MX200 and MX300
Contents

Remote support user

In cases where you need to diagnose problems on the video
system you can create a remote support user.
The remote support user will be granted read access to the
system and will have access to a limited set of commands
that can aid troubleshooting.
You will need assistance from Cisco Technical Assistance
Center (TAC) to acquire the password for the remote
support user.
The remote support user should only be enabled
for troubleshooting reasons when instructed by
Cisco TAC.
D14850.10 MX200 and MX300 Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface Web interface
Navigate to: Maintenance > System Recovery: Remote Support User tab
System settings
Create remote support user
1. Open a case with Cisco TAC.
2. Click Create user.
3. Copy the text in the Token field and
send to Cisco TAC.
4. Cisco TAC will generate a password.
The remote support user is valid for seven
days, or until it is deleted.
51
Setting passwords
Delete remote support user
Click Delete user.
www.cisco.com — Copyright © 2011–2014 Cisco Systems, Inc. All rights reserved.
Administrator Guide
Appendices