Cisco TelePresence MX200 Administrator's Manual page 102

Cisco TelePresence MX200 and MX300
Contents
Video Input DVI [1] Type
The official DVI standard supports both digital and analog signals. In most cases the default
AutoDetect setting can detect whether the signal is analog RGB or digital. However, in some
rare cases when DVI-I cables are used (these cables can carry both the analog and digital
signals) the auto detection fails. This setting makes it possible to override the AutoDetect and
select the correct DVI video input.
Requires user role: ADMIN
Value space: <AutoDetect/Digital/AnalogRGB/AnalogYPbPr>
AutoDetect: Set to AutoDetect to automatically detect if the signal is analog RGB or digital.
Digital: Set to Digital to force the DVI video input to Digital when using DVI-I cables with both
analog and digital pins and AutoDetect fails.
AnalogRGB: Set to AnalogRGB to force the DVI video input to AnalogRGB when using DVI-I
cables with both analog and digital pins and AutoDetect fails.
AnalogYPbPr: Set to AnalogYPbPr to force the DVI video input to AnalogYPbPr, as the
component (YPbPr) signal cannot be auto detected.
Video Input DVI 1 Type: AutoDetect
Example:
Video Input Source [1..2] Name
Enter a name for the video input source.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Video Input Source 1 Name: ""
Example:
Video Input Source [1] Connector
Select which video input connector to be active on video input source 1.
Requires user role: ADMIN
Value space: <DVI>
DVI: Select DVI when you want to use the DVI as input source 1.
Video Input Source 1 Connector: DVI
Example:
D14850.10 MX200 and MX300 Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
Video Input Source [2] Connector
Select which video input connector to be active on video input source 2.
Requires user role: ADMIN
Value space: <CAMERA>
CAMERA: Select CAMERA when you want to use the camera as input source 2.
Video Input Source 2 Connector: CAMERA
Example:
Video Input Source [1..2] Type
Set which type of input source is connected to the video input.
Requires user role: ADMIN
Value space: <other/camera/PC/DVD/document_camera/whiteboard>
other: Use this when none of the below options match.
camera: Use this when a camera is connected to the video input.
PC: Use this when a computer is connected to the video input.
DVD: Use this when a DVD player is connected to the video input.
document_camera: Use this when a document camera is connected to the video input.
whiteboard: Use this when a whiteboard camera is connected to the video input.
Video Input Source 1 Type: PC
Example:
www.cisco.com — Copyright © 2011–2014 Cisco Systems, Inc. All rights reserved.
102
Administrator Guide
Setting passwords Appendices