System Input - Minolta Di450 Service Manual

Touch Panel
Display
Peripheral Mode Select the type of external I/F operation.
✽ After the setting has been made, touch "END" and turn OFF and
(3)

System Input

• This function allows the Tech. Rep. to change the fixed zoom ratios, set the paper size,
define the marketing area, and make other settings.
Touch Panel
Display
Change Fixed Change a fixed zoom ratio to a desired value.
Zoom <Procedure>
1. Touch the key of the fixed zoom ratio to be changed.
2. Press the Clear key.
3. Enter the new ratio from the 10-Key Pad.
4. Touch "Input" to validate the new setting.
Paper Size Input Set the paper size.
<Procedure>
1. Select the paper source.
2. Select the paper size.
3. Touch "END" to validate the new setting.
Marketing Area Set the marketing area.
Original Size Select "ON" when the optional Original Size Detecting Sensor is
Detecting Option mounted.
Tel. # Input Enter the telephone number that will appear on the Touch Panel when
a malfunction occurs in the copier.
<Procedure>
1. Enter the phone number from the 10-Key Pad. Use the Interrupt
2. Touch "END" to validate the phone number setting.
Hard Disk Select "ON" if a Hard Disk is mounted.
Setting (The default is
Mode 1 External I/F operation mode 1
External I/F operation mode 2
Mode 2
Mode 3 External I/F operation mode 3
ON the Power Switch.
Setting (The default is
MSJ
ON
key to enter a hyphen "-."
ON
S-26
Highlighted
Highlighted
MC ME
).
).
Other Areas
OFF
OFF