46
Customer Call Guide
When I turn the unit on, all I
get is water fill.
My ice does not come out in a
perfect cube shape.
The cubes do not fall into the
bin as individual cubes.
Not enough ice is stored in
the bin.
Concern
Ounce the unit is turned on, there will be a three minute water fill. This
ensures a fresh batch of water has filled the trough. If water flows
more than three minutes, a service call will be required.
When the ice is made, a small hole or "dimple" will appear on the front
or top of the cube. Increasing or decreasing the time of the freeze
cycle will adjust the size of the dimple.
This is normal. You can use the scoop to break the cubes apart.
Make sure the unit is full.
Response