Cs Zn Reporting Opt. (Addr 0358-0389 & 0391-0394) - NAPCO Gemini GEM-P1632 Programming Instructions Manual

CS ZON E REP OR TING OP TI ONS (ADDRESS 0358-0389)
ADDRESS 0358-0365
CONTROL PANEL ZONES REPORT CODE
ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 ZONE 7 ZONE 8
0358 0359 0360 0361
L R L R L R L R
ADDRESS 0374-0377
ZONES REPORT CODE
ZONE 17 ZONE 18 ZONE 19 ZONE 20
0374 0375 0376 0377
L R L R L R L R
Default for Group Zone Report Codes depends on Easy Menu Question "RCVR. FORMAT".
ZONE REPORT
NOTE: If "Zone Doubling" (Address 0721) is not enabled, then Zones 1-8 are included in the control panel and
CODE OPTIONS
Zones 9-32 are EZM Zones. If "Zone Doubling" is enabled, then Zones 1-16 are included in the control panel and
DATA ENTRIES
Zones 17-32 are EZM Zones. See Address 0737-0742 to enable "EZM Zone Groups".
LEFT RIGHT
DATA
ENTRIES MODEM CODE
LEFT
1 Fire
2 Panic
3 Burglary
4 Hold up
7 Gas Alarm
8 Heat Alarm
0 Auxiliary Alarm
B 24 Hour Auxiliary
CS AREA & SYS TEM R E POR TIN G OPTION S (ADD RESS 0391, 0392 & 0394)
LEFT DATA
AREA VALUES
"
)
(CIRCLE
AREA 1
1
RESERVED
2
RESERVED
4
RESERVED
8
CS SYSTEM REPORT OPTIONS
Cancel Next Test Timer on any Report
Disable Wait for Silence
Disable Wait for Handshake
Disable Auto Dial Tone Detect
CS AREA & SYSTEM REPORTING OPTIONS:
!
1. Select the desired option by circling
right).
!
2. Add the data values (ex: F=15=(1+2+4+8) from the selected options. See page 23).
!
3. Enter in address location (left and right digits).
NOTE: Dark shaded data value box shows option not available. Press
L
NAPCO Security Systems
0362 0363 0364 0365
L R L R L R L
ADDRESS 0378-0381
ZONES REPORT CODE
ZONE 21 ZONE 22 ZONE 23 ZONE 24
0378 0379 0380
L R L R L R L
PULSE EVENT CODE will be the first digit of the 2 digit reporting code. The second digit will be the
second digit of the reporting zone. For example, for zone 9 (address 0366), if the right digit is "3", then
the reporting code is "39". For example, for zone 15 (address 0372), if the right digit is "4", then the
reporting code is "45".
MODEM CODES determine the zone types reported for the following formats: SIA and ADEMCO Point ID.
!
1. Select the desired Modem Code for each zone from the table shown.
U D
!
2. Press or to save.
DISABLE OPENING REPORTS
ADDRESS 0391
LEFT DIGIT (SUM RIGHT DIGIT
OF DATA VALUES)
blank (•)
[Default = blank (•) blank (•)]
LEFT DATA
VALUES
"
)
(CIRCLE
LEFT DIGIT (SUM
OF DATA VALUES)
1
2
4
[Default = blank (•) blank (•)]
8
"
the data values for each digit (left and
ADDRESS 0366-0369
ZONES REPORT CODE
ZONE 9 ZONE 10 ZONE 11 ZONE 12
0366 0367 0368
L R L R L
R
ADDRESS 0382-0385
ZONES REPORT CODE
ZONE 25 ZONE 26 ZONE 27 ZONE 28
0381 0382 0383 0384
R L R L R L
LEFT DATA
AREA VALUES
(CIRCLE
AREA 1
RESERVED
RESERVED
RESERVED
ADDRESS 0394
RIGHT DIGIT (SUM
OF DATA VALUES)
U D
or to save.
X
GEM-P1632 Programming Instructions
ADDRESS 0370-0373
ZONES REPORT CODE
ZONE 13 ZONE 14 ZONE 15 ZONE 16
0369
0370 0371
R L R
L R L R
ADDRESS 0386-0389
ZONES REPORT CODE
ZONE 29 ZONE 30 ZONE 31 ZONE 32
0385 0386 0387
R L R L R L R
DISABLE CLOSING REPORTS
"
)
ADDRESS 0392
1
LEFT DIGIT (SUM
2
OF DATA VALUES)
4
8
[Default = blank (•) blank (•)]
LEFT DATA
VALUES CS SYSTEM REPORT OPTIONS
"
)
(CIRCLE
1 Backup Report on Telco 2
2 Touch-tone Dialing Only *
4 Touch-tone Dialing w/Rotary Backup *
8 RESERVED
* NOTE: If neither Touch-tone Dialing nor
Touch-tone w/Rotary Backup is selected, then
system defaults automatically to Rotary Dialing.
Leave blank (•) to select Rotary Dialing.
!
Page 31
0372 0373
L R L R
0388 0389
L R L R
RIGHT DIGIT
blank (•)