Troubleshooting; Computer Refuses To Start - Scan View SCANMATE F10 User Manual

Computer refuses to start

Check that the SCSI terminator is placed correctly. If it is not:
1 • Turn off the computer.
2 • Turn off the scanner and any other SCSI units.
3 • If the ScanMate F10 is the only SCSI unit, insert the terminator in the
free socket of the scanner.
If there is a chain of SCSI units, terminate the last unit of the chain.
4 • Turn on the scanner and any other SCSI units.
5 • Turn on the computer.
If the terminator is placed correctly, check the SCSI address switch on the
scanner, and check that all the attached SCSI units have been given different
addresses. If not:
1 • Turn off the computer.
2 • Turn off the scanner and any other SCSI units.
3 • Check the manuals of the various units to find out how to set the SCSI
addresses.
The procedure for the ScanMate F10 is described in this
manual under "Cable connections: Multiple-unit SCSI
connection."
4 • When all the addresses have been set as desired, turn on the scanner
and any other SCSI units.
5 • Turn on the computer.

TROUBLESHOOTING

ScanMate F10 • Operator's Manual
7•1