Maintenance
Replacing the air filters
The filter elements must be changed once a year. Change them more often
if a visual check shows that dust and dirt accumulate faster.
1 • Switch the scanner off.
2 • Remove the black plastic covers over the two filters that are located
at the back of the scanner.
3 • Remove the filter elements from both filters.
4 • Mount new filter elements and push the filter covers back into place.
Preparing the scanner for shipping
If for any reason you want to ship your scanner, it must be packed in its
original shipping container and packing materials, with its transportation
locks fitted. Otherwise the warranty will not be valid.
For a detailed explanation of how to repack the scanner, please see the
separate ScanMate F10 Installation and Repacking Instructions.
6•6
ScanMate F10 • Operator's Manual
Just pull off the covers; no tools are required.
Filter element
Cover