The Built-In Lightview Light Table - Scan View SCANMATE F10 User Manual

Handling originals and mounting plates
magnetic templates, which hold transparencies in place without any glass.
Other things that will help include the following:
• Install the scanner in a clean environment, preferably in a room without
carpets and where smoking is not permitted.
• Clean all the surfaces of the mounting plate before scanning, using only non-
abrasive, non-caustic cleaning agents that will not leave a residue. The best
choice is ordinary household glass cleaner and a soft, non-abrasive cloth.
CAUTION: Never use drum cleaner, acetone, benzine or other strong organic
solvents for cleaning the mounting plate.
• Clean transparencies with a soft brush and/or forced air. A compressed
air aggregate with ion neutralization is ideal. Glass cleaner can also be
used to clean transparencies.

The built-in LightView light table

The ScanMate F10 has a built-in 5000K light table that lets you view
originals while you are working with the preview scan, without losing
registration.
• To view a transmission original, simply lift the lid of the scanner. The
viewing light goes on automatically.
• To view a reflection original mounted on the top plate of the mounting
plate, lift the scanner lid and tip the top plate up.
• If necessary, the scanner tray can be manually moved from left to right by
pressing on either end of the scanner's front panel.
Press here to move the
scanner tray to the left
ON
READY
BUSY
ERROR
5•8
ScanMate F10 • Operator's Manual
Press here to move the
scanner tray to the right