Siemens Gigaset S450 IP User Manual page 15

First steps
Entering your name in the Gigaset.net
directory
With Gigaset.net you can call other
Gigaset.net users directly over the Internet
free of charge, without setting up an
account with a VoIP provider and without
making any further settings. You can find
Gigaset.net subscribers by carrying out a
name search in the Gigaset.net(page 27)
directory.
The following appears in the handset's dis-
play:
Connection Assist.
Start assistant
for Gigaset.net?
No
Press the display key.
§Yes§
Enter your Gigaset.net name:
Enter the name that you
would like to be listed under in
the Gigaset.net directory and
press
§OK§
tain up to 25 characters.
A connection to the Gigaset.net server is
established.
If there is already an entry under this
name, you receive a message to this effect
and you will be asked to enter a name
again.
If an entry in the Gigaset.net directory is
successful, the message
successfully added to Gigaset.net!" is dis-
played briefly.
If the attempt to create the entry fails
(e.g. because the phone is not connected
to the Internet), a message to this effect is
displayed briefly (see page 14). You can then
create the entry later via the Gigaset.net direc-
tory (see page 29).
14
Yes
. The name may con-
"Your user name is
Completing the VoIP settings
If you have made all the required entries,
the message "Connection data
appear on the display. The handset returns
to idle status.
If all the settings are correct and if the
phone can establish a connection to the
VoIP server, then the internal name of the
handset will be displayed (example):
Ð V
INT 1
10.08.06 09:45
FixedLine
You can now use your phone to make calls
via the fixed network and the Internet.
Callers can reach you on your fixed
network number and your VoIP number.
Please note:
To ensure that you can always be reached via
the Internet, the router must be permanently
connected to the Internet.
No connection to the Internet/VoIP server
If one of the following messages is dis-
played instead of the internal name after
the connection assistant is closed, errors
have occurred:
u
Server not accessible!
u
Provider registration failed!
Below you will find possible causes and
measures you can take.
Server not accessible!
The phone has no connection to the Inter-
net.
¤
Check the cable connection between
the base station and the router (the
LED on the base station must light up)
and the connection between the router
and the Internet connection.
¤
Check whether the phone is connected
to the LAN.
complete" will
IP