Handsfree Talking; Muting The Handset - Siemens Gigaset S450 IP User Manual

Å
Calls to your VoIP number
IP: 1234567890
for Anna
Accept Silence
1 Ringer tone icon
2 Number or name of caller
3 Receiving number: indicates which of your
VoIP phone numbers the caller has dialled.
You assign the names when you enter the
VoIP phone numbers into the phone
(page 85). For calls from Gigaset.net,
is displayed.
for Gigaset.net
Display when Calling Line Identification is
withheld
For calls from the fixed network, the caller
can withhold calling line identification or
not request it. In this case the number is
not displayed. The following is displayed
in place of the number:
u
External, if no number is transmitted.
u
Withheld, if the caller has withheld Call-
ing Line Identification.
u
Unavailable, if the caller has not
arranged Calling Line Identification.
1
2
3
Making calls with VoIP and the fixed network

Handsfree talking

In handsfree mode, instead of holding the
handset to your ear you can put it down,
e.g. on the table in front of you, to allow
others to participate in the call.
Activating/deactivating handsfree
mode
Activating while dialling
~ d
Enter number and press
briefly/press and hold the
handsfree key to select the
connection type (page 21).
¤
You should inform your caller before
you use the handsfree function so that
they know someone else is listening.
Switching between earpiece and
handsfree mode
¤
Press the handsfree key d to activate
or deactivate handsfree talking during
a call.
If you wish to place the handset in the
charging cradle during a call:
¤
Press and hold the handsfree key d
while placing the handset in the charg-
ing cradle. If the handsfree key d
does not light up, press the key again.
For how to adjust the loudspeaker vol-
ume, see page 61.

Muting the handset

You can deactivate the microphone in
your handset during an external call.
Your caller will hear hold music, if acti-
vated (page 65).
Muting the handset
u
Press the control key on the
left to mute the handset.
Cancelling muting
" / a Press the display key or the
end call key to cancel the mut-
ing.
23