Mode Menu; Patterns - Raymarine p70 Installation And Operation Instructions Manual

9.3 Mode menu

Pilot modes are accessed from the Mode menu. The available
modes are determined by the autopilot system and the selected
vessel hull type.
The modes available are shown below.
Evolution
Pattern Power vessel
Track all
Wind vane Sailing vessel only
*Power Steer p70R and joystick only
Note:
• * Power steer mode is only available on vessels fitted with a
rudder reference transducer.
• ** Wind vane mode is only available if there is a connect
source of wind data.
The mode menu also provides a shortcut key option that enables
a mode to be assigned to the Left Soft button (The default
option is Track).
Pilot modes

9.4 Patterns

A number of pre-set fishing patterns are available which can
be used with their default settings or adjusted to your own
preference.
The following patterns are available:
SPX SmartPilot Pattern
Motor and Fishing Circle
vessels
all
Zig Zag
Sailing vessel only
p70R and joystick only
Cloverleaf
Spiral
Circle against
Figure 8
Pattern search
180 turn
Box search
Using a fishing pattern
In order to use a fishing pattern:
1. Press the RIGHT SOFT button to open the menu.
2. Using the UP and DOWN buttons highlight Mode and press
SELECT.
3. Using the UP and DOWN buttons highlight Pattern and
press SELECT.
4. Using the UP and DOWN buttons highlight the fishing pattern
you wish you use and press SELECT.
5. The pattern settings screen shall be displayed, showing the
parameters currently set for the selected pattern. If you want
to change any of the parameters:
i. Select the parameter you want to change, then press
ii. Use the UP and DOWN buttons to set the value you want,
iii. Repeat steps i and ii as necessary, for the other
6. When all parameters are set as required, and with the pattern
settings screen displayed, press AUTO. The autopilot then
steers the boat over the fishing pattern you selected.
To return to manual steering at any time, press STANDBY.
Adjustment
Direction
Radius
Direction
Angle
Length
Direction
Radius
Direction
Radius
Increment
Direction
Radius
Distance
Direction
Radius
Direction
Width
Height
Width increment
Height increment
Direction
Radius
Direction
Width
Height
EDIT.
then press SAVE to save the setting and return to the
Pattern settings screen.
parameters.
Icon
55