• There should be no obstacle between the user and the pilot
controller.
• The pilot controller should be situated at least 0.8 m from an
engine, compass, high current power cables, or any magnetic
device.
Compass safe distance
To prevent potential interference with the vessel's magnetic
compasses, ensure an adequate distance is maintained from
the product.
When choosing a suitable location for the product you should
aim to maintain the maximum possible distance from any
compasses. Typically this distance should be at least 1 m (3 ft)
in all directions. However for some smaller vessels it may not
be possible to locate the product this far away from a compass.
In this situation, when choosing the installation location for your
product, ensure that the compass is not affected by the product
when it is in a powered state.
Viewing angle considerations
As display contrast, color and night mode performance are all
affected by the viewing angle, Raymarine recommends you
temporarily power up the display when planning the installation,
to enable you to best judge which location gives the optimum
viewing angle.
20
3.11 Unit dimensions
p70 and p70r dimensions
A
Item
A.
B.
C.
D.
E.
F.
G.
H.
p70
p70r
C
D
E
C
D
H
G
G
Description
110 mm (4.33")
115 mm (4.52")
14 mm (0.55")
30 mm (1.18")
35 mm (1.38")
90 mm (3.54")
17 mm (0.67")
20.6 mm (0.81")
E
D12103-1
p70 / p70R