User Settings - Raymarine p70 Installation And Operation Instructions Manual

Commissioning menu
Commissioning menu options are dependant on connected autopilot system.
Note: Not all options are available when Calibration Lock is turned On.
Menu option
Dockside Wizard
Sea Trial Wizard
Motor phasing
Swing Compass
Auto Learn
Align Compass GPS
Align Compass
Pilot Factory Reset
Debug Level
Restart Compass
Compass Lock

User Settings

When connected to a SeaTalk autopilot system a User settings
menu will be available.
The User settings menu can be accessed from: Main Menu >
Set up > Autopilot calibration > User settings. Once entered
the user settings menu will cycle through all available options.
These options shall be available to users when calibration lock
is turned on.
80
Description
Initiates the Dockside wizard
process.
Initiates the Sea Trial wizard process.
Initiates the motor phasing (drive
check) wizard
Initiates the swing compass wizard
Initiates the Auto Learn process
Initiates the align compass to GPS
heading wizard
Manual adjustment of the compass
offset
Resets the autopilots course
computer to factory default settings.
Sets the debug level value. The
Debug option is only available when
calibration lock is turned off.
Restarts the compass
Locks the compass from performing
further automatic linearization.
Evolution autopilots
Yes
N/A
N/A
N/A
N/A
Yes
• -10° to 10°
• Yes
• No
• Level 0 to 31
• Yes
• Cancel
• On
• Off
SeaTalk and SPX SmartPilots
Yes
Yes
Yes
Yes
Yes
Yes
• -179° to 180°
• Yes
• No
N/A
N/A
N/A
p70 / p70R