Vessel Settings - Raymarine p70 Installation And Operation Instructions Manual

Table of Contents

Advertisement

Vessel Settings

Vessel settings are dependant on connected autopilot system and vessel drive type.
The Vessel settings menu can be accessed from: Menu > Set-up > Autopilot Calibration > Vessel Settings.
Note: When connected to a SeaTalk system the vessel settings listed below are part of the Dealer settings menu, Menu >
Set-up > Autopilot Calibration > Dealer Settings.
Note: Not all options are available when Calibration Lock is turned On.
Item
Description
Vessel type
The vessel type options will normally give
optimum performance for typical vessels of
each type. However, you may find you can
improve the performance of your vessel by
selecting an option for a different vessel type.
Drive type
List of compatible drive types.
The list is dependant upon connected
autopilot system.
Note: The drive type option is not
available in systems comprising of an
EV-2 and an ACU-300.
Cruise speed
Set the cruise speed to the vessel's typical
cruising speed. If no speed data is available,
the SmartPilot system will use the cruise
speed value you set as a default.
Compass Offset
On systems without a GPS then the compass
heading must be manually aligned to the
vessels known heading.
Set up menu options
Evolution autopilots
• Sail.
• Sail (Slow turn).
• Sail Catamaran.
• Power.
• Power (slow turn).
• Power (fast turn).
• Type 1 Linear — ACU-200 and
ACU-400
• Type 2 Linear — ACU-400 only
• Type 2 Hydraulic Linear — ACU-400
only
• Type 3 Hydraulic Linear — ACU-400
only
• I/O Stern — ACU-200 and ACU-400
• Wheel Drive — ACU-100, ACU-200
and ACU-400
• Tiller — ACU-100, ACU-200 and
ACU-400
• CR Solenoid — auto detected —
ACU-300 only (not selectable)
• Sport Drive — ACU-200 and ACU-400
• Rotary Drive Type 1 — ACU-200 and
ACU-400
• Rotary Drive Type 2 — ACU-400 only
• Hydraulic Pump Type 1 (0.5L) —
ACU-100 only
• Hydraulic Pump Type 1 — ACU-200
and ACU-400
• Hydraulic Pump Type 2 — ACU-400
only
• Hydraulic Pump Type 3 — ACU-400
only
• Verado — ACU-200 and ACU-400
N/A
• -10° to 10°
SeaTalk and SPX SmartPilot Options
• Race sail.
• Sail cruiser.
• Catamaran.
• Workboat.
• RIB.
• Outboard speed boat.
• Inboard speed boat.
• Power cruiser 1. — Vessel speeds up
to 12 knots.
• Power cruiser 2.— Vessel speeds up
to 30 knots.
• Power cruiser 3 — Vessels speeds
greater than 30 knots.
• Sport fishing.
• Pro fishing.
• Type 1 linear
• Type 2 linear
• Type 3 linear
• Hydraulic pump type 1
• Hydraulic pump type 2
• Hydraulic pump type 3
• Rotary drive type 1
• Rotary drive type 2
• Rotary type 1
• Rotary type 2
• I/O stern
• CAN
• Wheel drive.
• Tiller
• Sport drive
• Constant running pump.
• Verado
• 0 to 99 Kts
• -179° to 180°
75

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P70rE22166E22167

Table of Contents