Mode Menu; Patterns - Raymarine p70 Installation & Operation Instructions

9.2 Mode menu

Pilot modes are accessed from the Mode menu. The
available modes are determined by the autopilot
system and the selected Vessel Hull Type.
The modes available are shown below.
Evolution
Pattern Power vessel
Track all
Wind vane Sailing vessel only Sailing vessel only
(2)
Power Steer p70Rs and joystick
(1)
only
Note:
• Power steer mode is only available on vessels
(1)
fitted with a rudder reference transducer.
• Wind vane mode is only available if there is
(2)
a connect source of wind data.
The mode menu also provides a shortcut key option
that enables a mode to be assigned to the Left Soft
button (The default option is Track).
Pilot modes

9.3 Patterns

Fishing patterns are available, that can be used
with their default settings or adjusted to your own
preference. Fishing patterns require GPS data to be
available on your system.
Pattern
SPX SmartPilot
Circle
Motor and Fishing
vessels
all
Zig Zag
p70Rs and joystick
only
Cloverleaf
Spiral
Circle against
Figure 8
Pattern search
180 turn
Box search
Using a fishing pattern
1. Press the RIGHT SOFT button to open the menu.
2. Using the UP and DOWN buttons highlight Mode
and press SELECT.
3. Using the UP and DOWN buttons highlight
Pattern and press SELECT.
4. Using the UP and DOWN buttons highlight the
fishing pattern you wish you use and press
SELECT.
5. The pattern settings screen shall be displayed,
showing the parameters currently set for the
selected pattern. If you want to change any of
the parameters:
i. Select the parameter you want to change,
ii. Use the UP and DOWN buttons to set the
Adjustment
Direction
Radius
Direction
Angle
Length
Direction
Radius
Direction
Radius
Increment
Direction
Radius
Distance
Direction
Radius
Direction
Width
Height
Width increment
Height increment
Direction
Radius
Direction
Width
Height
then press EDIT.
value you want, then press SAVE to save
Icon
61